Jump to content

 

Achievement Discussion Thread


iBuzz7S
 Share

Recommended Posts

  • 1 month later...

How to make HAY BALES...

 

NOTE: workers cannot be used for most of this

 

Tasks requirements

- have a field seeded with GRASS (only need to seed field ONCE; I used grass, but grain CHAFF might work)

- #1: mow this field (grass will grow again on its own)

- #2: go over field with a ** tractor + TEDDER **(this will dry the grass, which looks like dead brown grass clippings)

- #3: go over the field of dry grass with a **tractor + WIND ROWER ** to make nice and neat dead grass lines

- #4: using > tractor + baling machine... drive over and follow the dead grass lines you made; the bales should drop on own

- #5: collect these bales using > tractor + bale collect trailer (I used the 16 capacity) NOTE: I had to approach the bales from the left to be able to collect and load

 

Example LIST of gear I used

- (one) STEYR Multi 4115 (orange/white tractor; to pull tedder)

- (one) New Holland T8.320 (320 horsepower tractor; mowing, windrowing, bale machining, bale collecting)

- (one) HORSCH Pronto seeder to start my grass field

- (one) KUHN FC 3525 F mower (on front of my New Holland tractor)

- (one) KUHN FC 10030 mower (on back of New Holland tractor

- (one) Pottinger HIT 12.14 T (teeder, for my STEYR tractor)

- (one) KRONE Swadro 2000 windrower (for my NEw Holland tractor)

- (one) bale technology New Holland BIGBALER 1290 (for my New Holland tractor)

- (multiple) bale technology ARCUSIN Autostack FS 63-72 trailor (+16 capacity, for my New Holland trailer)

- field 22, gone over three times, averaging 34 bales each go, about an hour and a half each cycle

Edited by dexcompleted
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
  • Create New...